Create a simple sketch to find similar parts
1
1
2|0
3
4
4
0
0
0
0
0
0
0
0
0
0
rms_8s_0
预览图
PREVIEWPERLINE
ORDERNO
technical specifications
TECHNICAL_SPECIFICATIONS
name
NAME
1
2
3
rms_8s_0
The controller is available in a NEMA Type 4 (RMS-G) polycarbonate housing. The controller is available in either a 120 VAC (RMS-1G), 240 VAC (RMS-2G), or 24V ACDC (RMS-3G) power input. Specify input voltage upon ordering. The sensor can be used in outdoor environments and is connected to the controller with a shielded twisted pair (Belden 8442 or similar). The maximum separation distance between controller and sensor is 200 feet. Each inductive sensor is supplied with 6 feet of electrical cable. Field splice for longer lengths. Inductive sensors require between 10 VDC to 30 VDC to operate (voltage supplied by RMS controller). Input and output wiring done on internal screw terminal strip. The unit has a dry, unpowered DPDT relay rated for 5A @ 120 VAC, 240 VAC, and 480 VAC. Target disks available, or use any ferrous metal to generate pulses. The operating temperature range is -50ºF to 150ºF (-45ºC to 66ºC).
rms_8s_0
rms_12s_0
The controller is available in a NEMA Type 4 (RMS-G) polycarbonate housing. The controller is available in either a 120 VAC (RMS-1G), 240 VAC (RMS-2G), or 24V ACDC (RMS-3G) power input. Specify input voltage upon ordering. The sensor can be used in outdoor environments and is connected to the controller with a shielded twisted pair (Belden 8442 or similar). The maximum separation distance between controller and sensor is 200 feet. Each inductive sensor is supplied with 6 feet of electrical cable. Field splice for longer lengths. Inductive sensors require between 10 VDC to 30 VDC to operate (voltage supplied by RMS controller). Input and output wiring done on internal screw terminal strip. The unit has a dry, unpowered DPDT relay rated for 5A @ 120 VAC, 240 VAC, and 480 VAC. Target disks available, or use any ferrous metal to generate pulses. The operating temperature range is -50ºF to 150ºF (-45ºC to 66ºC).
rms_12s_0
rms_18s_0
The controller is available in a NEMA Type 4 (RMS-G) polycarbonate housing. The controller is available in either a 120 VAC (RMS-1G), 240 VAC (RMS-2G), or 24V ACDC (RMS-3G) power input. Specify input voltage upon ordering. The sensor can be used in outdoor environments and is connected to the controller with a shielded twisted pair (Belden 8442 or similar). The maximum separation distance between controller and sensor is 200 feet. Each inductive sensor is supplied with 6 feet of electrical cable. Field splice for longer lengths. Inductive sensors require between 10 VDC to 30 VDC to operate (voltage supplied by RMS controller). Input and output wiring done on internal screw terminal strip. The unit has a dry, unpowered DPDT relay rated for 5A @ 120 VAC, 240 VAC, and 480 VAC. Target disks available, or use any ferrous metal to generate pulses. The operating temperature range is -50ºF to 150ºF (-45ºC to 66ºC).
rms_18s_0
Material Control - Non-Contact Motion Control
| 订购编码 | rms_8s_0 |
| 上次修改 | 26.10.2022 08:30:09 |
| 单位 |
分类
