0006085962/01350_Rexa SUPRA-V08DA-683_T 20.1-2_30GEx-E3

0006085962/01340

Rexa SUPRA-V08DA-683/T 20.1-2/22GEx

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-683/T 20.1-2/22GEx

EC010733

BA

5.1301. EN-GJL-250

0006085962/01342

Rexa SUPRA-V08DA-682/T 20.1-2/22GEx

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-682/T 20.1-2/22GEx

EC010733

BA

5.1301. EN-GJL-250

0006085962/01344

Rexa SUPRA-V08DA-684/T 20.1-2/30GEx-E3

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-684/T 20.1-2/30GEx-E3

EC010733

BA

0

0006085962/01346

Rexa SUPRA-V08DA-686/T 20.1-2/30GEx-E3

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-686/T 20.1-2/30GEx-E3

EC010733

BA

0

0006085962/01348

Rexa SUPRA-V08DA-683/T 20.1-2/22GEx

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-683/T 20.1-2/22GEx

EC010733

BA

5.1301. EN-GJL-250

0006085962/01352

Rexa SUPRA-V08DA-686/T 20.1-2/30GEx-E3

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-686/T 20.1-2/30GEx-E3

EC010733

BA

5.1301. EN-GJL-250

0006085962/01354

Rexa SUPRA-V08DA-687/T 20.1-2/30GEx-E3

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-687/T 20.1-2/30GEx-E3

EC010733

BA

5.1301. EN-GJL-250

0006085962/01356

Rexa SUPRA-V08DA-687/T 20.1-2/30GEx-E3

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-687/T 20.1-2/30GEx-E3

EC010733

BA

5.1301. EN-GJL-250

0006085962/01358

Rexa SUPRA-V08DA-684/T 20.1-2/30GEx-E3

WILO SE

350

Submersible sewage pump with and without active cooling system for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

Submersible sewage pump as submersible monobloc unit for stationary and portable wet well and dry well installation. Hydraulics The outlet on the pressure side is designed as horizontal flange connection. The maximum possible amount of dry matter is 8 %. Vortex impellers are used. Motor Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty. The self-cooling motors (FK, FKT, HC motors) have an active cooling system and transfer their waste heat to the medium being pumped by means of an integrated heat exchanger. Therefore, these motors are suitable for continuous duty in immersed and non-immersed condition, and therefore also for dry well installation. All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe. The connection cable has bare cable ends and the length is customer specific. The cable inlet on T, HC and FKT motors is longitudinally watertight. Seal Fluid-side and motor-side sealing is possible in the following versions depending on the motor type: *Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side *Version G: Two independently-acting mechanical seals *Version K: Block seal cartridge with two independently acting mechanical seals High efficiency motors In addition to the standard motors, high-efficiency motors with IE3 classification (in accordance with IEC 60034-30) are also available. As these have the same basis as the standard motors, they have the same features and functions. This means that the same hydraulic systems are also available. Ex rating The motors are available with Ex rating in accordance with ATEX and FM.

Rexa SUPRA-V08DA-684/T 20.1-2/30GEx-E3

EC010733

BA

0