| 最大相对湿度 | 95 |
| 最小相对湿度 | 5 |
| 绝缘剥离长度 | 16 |
| 最大连接导体截面积（多股线） | 25 |
| 最小连接导体截面积（多股线） | 1.500 |
| 保护度(IP)，已安装 | IP20 |
| Approval certificates | CSA |
| short-circuit breaking capacity | 25 |
| max. continuous operating voltage AC | 275 |
| nominal discharge current (8/20) µs (L-N) | 20 |
| voltage protection level (L-N) | 1.350 |
| system configuration | TN |
| fault indication at device | optical |
| suitable for outdoor use | No |
| type of electrical terminal | Screw connection |
| width | 17.600 |
| height | 96.800 |
| depth | 65.700 |
| Product type | VAL-MS 230/FM |
| EAN代码 | 4017918182595 |
| 厂商产品编号 | 2839130 |
| 制造商名称 | Phoenix Contact GmbH & Co. KG |
| address of additional link | http://www.phoenixcontact.com/product/2839130 |
| type of certificate | CSA |
| Manufacturer product description | Surge voltage arrester consisting of base element with remote indicator contact and ground connector with high-capacity varistor, for mounting on NS 35/7.5, nominal voltage: 230 V AC, 1-channel |
| minimum ambient temperature (during operation) | 5 |
| maximum ambient temperature (during operation) | 80 |
| Manufacturer product designation | Type 2 surge arrester |
| GLN of manufacturer | 4063151 |
| Integrated overcurrent protective device | Yes |
| no leakage current | No |
| protective element pluggable | Yes |
| operating voltage AC (UL 1449) | 230 V AC |
| max. cross-section of the remote indication (flexible) | 1.500 |
| min. cross-section of the remote indication (flexible) | 0.140 |
| max. cross-section of the remote indication (rigid) | 1.500 |
| min. cross-section of the remote indication (rigid) | 0.140 |
| max. voltage of remote indication (AC) | 250 |
| max. current of remote indication (AC) | 1 |
| max. voltage of remote indication (DC) | 30 |
| max. current of remote indication (DC) | 1 |
| nominal discharge current (8/20) µs (N-PE) | 20 |
| nominal discharge current (8/20) µs (L-PE(N)) | 20 |
| max. discharge current (8/20) µs (L-N) | 40 |
| max. discharge current (8/20) µs (N-PE) | 40 |
| max. discharge current (8/20) µs (L-PE(N)) | 40 |
| max. overcurrent protective device (branch wiring) | 125 |
| max. overcurrent protective device (V-type wiring) | 80 |
| max. allowed elevation above mean sea level | 2000 |
| min. torque (UL 1449) | 3.390 |
| min. torque, alarm circuit (UL 1449) | 0.452 |
| AC power frequency | 50 |
| nominal discharge current (UL 1449) | 20 |
| max. continuous operating voltage AC (L-N) | 275 |
| measured limiting voltage (L-N) (UL 1449) | 1900 |
| connection method of the remote indication | Screw connection |
| remote indication integrated | yes |
| number of ports | one-port |
| max. wire cross-section (UL 1449) | 2 |
| min. wire cross-section (UL 1449) | 14 |
| nominal voltage (for AC) | 240 V AC |
| test standard | IEC 61643-11 |
| SPD type (IEC 61643) | T2 |
| characteristic of backup fuse | total range device protection |
| mode of protection AC (UL 1449) | L-N |
| service configuration (UL 1449) | single phase |
| type of remote indication contact | potential free change-over contact |
| TOV - behaviour (120 min) | safe failure |
| 宽度以除数为单位 | 1 Div. |
| 绝缘材料的可燃性等级（根据UL 94) | V0 |
| 固定最大导体横截面 | 35 |
| 最大额定频率 | 60 |
| 固定最小导体横截面 | 1.500 |
| 最小额定频率 | 50 |
| 净重 | 135.200 |
| 安装方式 | Top-hat rail TH35 |
