Stainless Steel Washers with axial friction bearing

Stainless Steel Washers with axial friction bearing

Stainless Steel Washers with axial friction bearing

Stainless Steel Washers with axial friction bearing

Stainless Steel Washers with axial friction bearing

不锈钢圆盘 适用于偏心把手

不锈钢圆盘 适用于偏心把手

Stainless steel washer for cam lever

SUS316垫圈

不锈钢圆盘 适用于偏心把手

不锈钢平垫圈(检测磁性用)

Stainless Steel-Washers

Polymer bushing and stainless steel washer hinge 101.6 x 76.2 mm

Polymer bushing and stainless steel washer hinge 101.6 x 76.2 mm

Round top weld-on aluminium hinges - stainless steel pin - stainless s...

Round top weld-on aluminium hinges - stainless steel pin - stainless s...

Round top weld-on aluminium hinges - stainless steel pin - stainless s...

Round top weld-on aluminium hinges - stainless steel pin - stainless s...

Washers / Levelling disks

Stainless Steel-Countersunk washers

Stainless Steel-Bezel discs

Stainless Steel-Spherical washers

Stainless Steel-Spherical levelling washers

Stainless Steel-Serrated locking plates, Type A with tapped hole d3 in the center...

Stainless Steel-Serrated locking plates, Type B with drilling d4 in the center, with...

Stainless Steel-Serrated locking plates, Type C with tapped hole d3 in the center...

Stainless Steel-Serrated locking plates, Type D with drilling d4 in the center, with...

Stainless Steel-Serrated locking plates, Type E without drillings blank, not hard...

Stainless Steel-Locking plates, Type A, Stud, unthreaded (for welding on)

Stainless Steel-Locking plates, Type B, Stud, with female thread

Stainless Steel-Locking plates, Type DH, Fastening flange, horizontal

Stainless Steel-Locking plates, Type C, Stud, with male thread

Stainless Steel-Locking plates, Type E, Plate (for welding on)

MEDIUM SIZED STAMPED WASHERS NFE 25-513M Inox A2 / S.S 304 or ...

SMALL STAMPED WASHERS NFE 25-513Z Inox A2 / S.S 304 or Ino...

LARGE STAMPED WASHERS NFE 25-513L Inox A2 / S.S 304 or Inox A4 / S.S 316

LARGE LARGE STAMPED WASHERS NFE 25-513LL Inox A2 / S.S 304 ou ...

FLAT STAMPED WASHERS DIN 125 Inox A2 / S.S 304 ou Inox A4 / S.S 316

LARGE MACHINED WASHERS NFE 25-513 LU Inox A1 / S.S 303 ou ...

MEDIUM SIZED MACHINED WASHERS NFE 25-513MU Inox A1 / S.S 303 ou ...

LARGE LARGE MACHINED WASHERS NFE 25-513LLU Inox A1 / S.S 303 ou ...

SMALL MACHINED WASHERS NFE 25-513 ZU Inox A1 / S.S 303 ou ...

SPRING WASHERS DIN 2093 Inox A1 / S.S 303

AZ SERRATED LOCK WASHERS DIN 6798 A NFE27-624 Inox A2 / S.S 304 ou ...

WAVE SPRING WASHERS DIN137 NFE 27-620 Inox A2 / S.S 304

JZ SERRATED LOCK WASHERS DIN 6798J NFE27-625 Inox A2 / S.S 304 ou ...

SPRING LOCK WASHERS DIN127B Inox A2 / S.S 304 ou Inox A4 / S.S 316

MACHINED CUP WASHERS NFE 27-619 Inox A1 / S.S 303

PRESSED CUP WASHERS NFE 27-619 Inox A2 / S.S 304

CONTACT LOCK WASHERS NFE 25-511 Inox A2 / S.S 304